Register Login

Forgot password?

Archer 700 Series – Flat Front Models

Manufactured by:
Archer

Archer 700 Series – Flat Front Models

.

$5,362.00

*Prices Vary on Each Model

Operating and Safety Features

Computer Controlled Safety and Efficiency Hot Surface Ignition (H.S.I.) Module

The Archer’s solid state electronic computer control system, gives you safety, convenience and efficiency not seen in Australia before. To start with the Archer electronic solid state module controls every function and operating feature of the heater for safe and efficient operation.

Operating and Safety Features

During operation the independent twin H.S.I. ignition system controls the ignition cycle of each burner automatically to ensure trouble free automatic ignition (no pilot light or troublesome piezo ignition) for added reliability, safety and lower gas bills.

During operation the remote flame sensors constantly monitor the status of the flame for added safety. Archer’s independent (H.S.I.) ignition system lets you select from 3 burner settings. Low, medium and high burn at the touch of a button from easy accessible controls for selection of your own comfort level and lowest operating cost.

Years of painstaking laboratory testing coupled with extensive in field trials have resulted in a truly reliable ignition system. Prior to start up of your heater it automatically purges any un-burnt gas prior to ignition for added safety.

The 3 speed fan which is automatically linked to each burner setting has been customised for optimum comfort and efficiency. The fan in the heater will not start operating until the heater has sufficiently warmed up. When you turn your heater off the fan will keep pushing warm air until all the built up heat in the heater has been extracted. All your heaters operating modes can be viewed on the display monitor located in the front panel.

Additional safety features such as flame failure safety, overheating safety, automatic shutdown if power or gas fails and fan start/stop protection are all built into the Archer solid state electronic module for customising your heater for added safety, optimum comfort and efficiency to give you the comfort of feeling safe in your home.

Zero Clearance Installation

Another direct installation and safety feature derived from the Archer’s revolutionary heat exchange system, is the zero clearance temperature achieved on the top, back and sides only of the heater, which allows the heater to be installed safely against combustible materials. The safety screen fitted to the large neo ceramic door glass will be welcoming news for parents with small children.

Automatic Humidifier Standard

Automatic Humidifier Standard

Most gas heaters dry out the air in the room. Remember the bowls of water in front of the old gas heaters? The Archer has ingeniously solved this problem with an automatic humidifier. Gas contains moisture which is normally expelled out the flue or chimney after combustion but the Archer is so efficient by taking 92% of the heat out of the burnt gases that the moisture drops out and condenses in the back of the heater.

This water is collected in a tank which is then pumped up to a stainless steel holding tank where it evaporates in the stream of hot air, which is blowing into your home. Air humidity is automatically restored. This feature is especially important for those with delicate throats or mild breathing difficulties.

NOTE: The amount of condensate build up depends on outside temperature, humidity levels, length of flue and heat settings. Long single vertical flue will cause the automatic humidifier to activate more often compared to short horizontal coaxial or single flue installations.

Click on the link Below for the Brochure

http://www.auroraclimatesystems.com.au/docs/Archer%20Gas%20Log%20Fire%20Catalogue.pdf

Installation Advantages

Low cost versatile installation

The Archer Gas Log Space Heater technology eliminates costs and flexibility on installations when compared to the installation of most other gas heaters, which require expensive and unsightly flue installations.

The Archer’s revolutionary plastic power flue and plastic 40mm ∅ PVC single flue system eliminates those costly installations and is ideal for high rise apartments, external and internal wall applications anywhere in your home and ideally can be used as a replacement for existing gas or oil space heaters.

The Archer Gas Log Space Heater due to its high efficiency with 92% heat extracted from Archer’s revolutionary heat exchanger ensures that surface temperatures of the heater are kept extremely low to allow zero clearance installations without the added cost of installing a zero clearance box, which allows you to create your own decorative fireplace at the lowest cost.

The PVC co-axial flue system will give you the added benefit of using external combustion air allowing the air in your home to remain fresh. Whilst the 40mm PVC single flue system gives you unlimited installation advantages.

Discover how the Archer Gas Log Space Heater can be installed in your choice of location of existing masonry fireplace, external and internal wall applications, high rise apartments and created zero clearance fireplaces all due to the small bore PVC co-axial or single flue system available only with an Archer heater.

Click on the link below for 700 Series Specifications

http://www.auroraclimatesystems.com.au/range.php

Technical Specifications

Free Standing Flat Front

Heater - Free Standing Flat Front Free Standing Flat Front

Flat Front Bolted Surround

Heater - Flat Front Bolted Surround Heater - Flat Front Bolted Surround

Flat Front 3-Sided Surround

Heater - Flat Front 3-Sided Surround Heater - Flat Front 3-Sided Surround

Flue & Installation Options

Created Fireplace

Created Fireplace

Internal Wall
(Created Fireplace)

Internal Wall (Created Fireplace)

External Wall
(Created Fireplace)

External Wall (Created Fireplace)

Side Wall

Side Wall

Masonry Internal

Masonry Internal

Masonry External

Masonry External

External Wall

External Wall

Under Floor

Under Floor

Internal – Vertical

Internal - Vertical

Top Flue
FSP600

Top Flue FSP600

Revolutionary Patented Triple Heat Exchanger

International Patent No PCT/AU2007/0011459

The secret of the Archer revolutionary 5.4 – 5.9 energy star performance is the patented triple heat exchanger that puts more heat into your home and money in your pocket instead of up the chimney. The Archer Gas Log Space Heater has shattered the boundaries of acceptable product design.

Revolutionary Patented Triple Heat Exchanger

The basis of the incredible leap in high heat output and high efficiency achieved by the Archer Gas Log Fire is the revolutionary heat exchange system which extracts 92% + heat from the incoming gas which is directly transferred into your home.

The Archer Gas Log Fire does not only feature a burning system that looks realistic, but also incorporates a combustion process which delivers high efficiency and high heat output. (Beauty – Efficiency – Heat)

Aurora after engaging in an extensive research and development program of many years have developed an innovative high efficiency heat exchange system which has amazed the industry and has achieved the highest appraisal from independent heating authorities for its innovative design and efficiency.

The Archer’s high efficiency 3 stage high performance heat exchange system, allows for the heat of the incoming combustible gases to be squeezed to 55°C before they enter the flue resulting in total combustion, to ensure that every megajoule of gas input energy available is put to work for heating the home.

This type of process of achieving high performance heat output has to date not been achieved by any other similar appliance, but with an Archer heater it is reality and you get the benefit.

Heater Comparison

Archer 5-Star Energy Efficiency

The Mj of a heater should not be used for comparing the product’s heat output and capacity. The Kw heat output and efficient heat transfer is the only true method of product comparison.
Example: A 30 Mj heater with a 5.7 Energy Star rating has a larger heat output than a 30 Mj 3 star energy reated heater.

Committed to the Environment
Share on Facebook

Rinnai 650 Gas Fire

Rinnai 650 Gas Fire

.

$4,993.00

Rating 3.7

Experience luxurious design 

The Rinnai 650 gas fire creates an ambient mood with Rinnai’s latest innovation – our new ember bed technology…

Rinnai’s ember bed technology has been designed to recreate the warm, enticing glow of a natural wood burning fireplace with the added heating benefits of gas fires.

Look closely and you’ll discover an intense radiant, light beneath the logs or stones, providing a deep, warm glow. Using crushed glass, halogen lamps and a bit of Rinnai magic, our latest innovation in gas fire technology sets new standards.

The Rinnai 650 is a small but efficient modern gas fireplace, making it great for smaller living spaces.

Ideal for replacing built-in fireplaces, new homes and even renovations, the 650 gas fire is designed to suit a range of installation environments.

Unique new ember bed technology

Minimalist design

Slimline remote control

Perfect for small spaces

FEATURES & PERFORMANCE

  • Unique ember bed technology to recreate the glow of a natural fire
  • Simple, slimline remote control that’s easy to use
  • Wide viewing window with double glazing for optimum fire view
  • Minimalist frame design that sits flush against the wall
  • Double glazed front – no need for a mesh guard
  • Compatible with LPG or natural gas
  • High heat output for up to 6kW of warmth
  • Designed for replacement, renovations or new homes
  • Available with either natural wood or glowing stones

Specifications

Colours Black or Titanium Grey
Gas Input MJ/h High 23
kW Output 5.0
Heats upto Capacity (m2) : Very Cold 46
Heats upto Capacity (m2) : Cold 55
Heats upto Capacity (m2) : Cool 74
Heats upto Capacity (m2) : Mild 85
AS4553 Efficiency Star Rating 3.7
Visual Dimensions (mm) : Width 640
Visual Dimensions (mm) : Height 654
Visual Dimensions (mm) : Depth 5
 

 

Share on Facebook

Rinnai Slimfire 252 Gas Fire

Manufactured by:
Rinnai

Rinnai Slimfire 252 Gas Fire

.

$3,508.00

Rating 2.8

Works as well as it looks.

There’s no better way to escape the winter chill than curling up in front of the Slimfire 252 gas fire. With romantic, flickering flames just a touch away, the 2-speed fan and 3 manual heat settings quickly deliver an even 5.0kw warmth when you need it most.

Have peace of mind knowing curious are hands are kept safe by the contemporary protective glass guard. The elegant slimline flat front is available in 3 contemporary finishes and perfectly suits renovations or replacing old heaters, perfectly complimenting any living space.

FEATURES & PERFORMANCE

3 manual heat settings

2 speed automatic fan

Easy one-touch electronic ignition

Stylish protective glass guard

  • 3 manual heat settings
  • 2 speed automatic fan – for even heat distribution
  • Easy one-touch electronic ignition
  • No additional flue required for sound masonry fireplaces – reducing installation costs
  • Perfect replacement for old space heaters
  • Zero clearance kit available for installation in fireplaces
  • Available in 3 colours – stainless steel on black, black and stainless steel
  • Stylish protective glass guard
  • Compatible with LPG or natural gas

Specifications

Inbuilt Cavity Dimensions (mm) : Height

550-630

Inbuilt Cavity Dimensions (mm) : Width

595-700

Inbuilt Cavity Dimensions (mm) : Depth

Min 360

Colours

Black, stainless steel on black & stainless steel

Gas Input MJ/h Low

7.7

Gas Input MJ/h High

25

kW Output

5.0

Heats upto Capacity (m2) : Very Cold

42

Heats upto Capacity (m2) : Cold

50

Heats upto Capacity (m2) : Cool

68

Heats upto Capacity (m2) : Mild

77

AS4553 Efficiency Star Rating

2.8

Thermostatic or Manual Control

Manual 3 settings

Style

Inbuilt

Gas Type

LPG & NG

Visual Dimensions (mm) Width

750

Visual Dimensions (mm) Height

645

Visual Dimensions (mm) Depth

335

 
 
Share on Facebook

Rinnai 950 Gas Fire

Rinnai 950 Gas Fire

.

$8,055.00

Rating 5.5

Spread the warmth and comfort

The Rinnai 950 represents a new generation of gas fire from Rinnai, achieving excellence in both energy efficiency and heat output, including a high 5.5* star rating and incredible heat output up to 8.1 kW**.

Combining a modern, elegant appearance with incredible efficiency, this premium gas fire heater is a must-have addition to bring warmth and ambience into your home. Perfect for large spaces and open plan living, the 950 gas fire has an output of 8.1kW**, creating a warm and cosy atmosphere that you’ll cherish.

With a host of extra features including a safety mesh guard and easy-to-use remote with temperature display, you’ll experience peace of mind and comfort during those chilly months. Settle in beside a flickering flame this winter with the Rinnai 950 gas fire.

*When installed using extended flue

**When using short flue

High heat output for large open plan areas

High 5.5* star efficiency rating

Ideal for new homes and major renovations

Fascia and burn media options to suit your style

FEATURES & PERFORMANCE

  • High 5.5 star efficiency rating*
  • Heat output up to 8.1 kW**, perfect for open plan living and large areas
  • Choose from 2 burn media options – Australian eucalyptus Log Set or Pebbles
  • Choose from 2 fascia options, stainless steel on black or black on black.
  • Safety mesh guard to give peace of mind and eliminate reflections
  • Mandatory dress guards are not shown for illustrative purposes.
  • Flexible power flueing

Specifications

Inbuilt Cavity Dimensions (mm) : Height 570
Inbuilt Cavity Dimensions (mm) : Width 965
Inbuilt Cavity Dimensions (mm) : Depth 570 (min)
Colours Stainless steel on black, black on black
Gas Input MJ/h Low 10
Gas Input MJ/h High 34
kW Output 8.1**
Heats upto Capacity (m2) : Very Cold 69
Heats upto Capacity (m2) : Cold 82
Heats upto Capacity (m2) : Cool 110
Heats upto Capacity (m2) : Mild 125
AS4553 Efficiency Star Rating 5.5*
Auto Off Mode Yes
Flame Button Yes
AS4553 Emissions Star Rating NG & LPG NG & LPG
Visual Dimensions (mm) Width 1020
Visual Dimensions (mm) Height 620
Visual Dimensions (mm) Depth 25
 
 
Share on Facebook

Rinnai 750 Gas Fire

Rinnai 750 Gas Fire

.

$5,377.00

Rating 3.7

Enjoy real radiance with the Rinnai 750 modern gas fireplace 

There’s no better way to escape the winter chill than curling up in front of a flickering fireplace. The new Rinnai efficient 750 gas fireplace combine cutting-edge technology and luxury design features to deliver an authentic ambience.

Rinnai’s innovative ember bed technology recreates the warm, radiant glow of a natural wood burning fire, delivering the romance of fire at the touch of a button – without any fuss.

The new gas fire range is all about design – featuring a wide viewing window, minimalist frames and a roaring flame pattern.

Specifically created to suit existing fireplace installations, the versatile 750 gas fire suits new homes and renovations

Available with either a natural wood log set or glowing pebbles, and a range of frame colours to suit your living style.

FEATURES & PERFORMANCE

Unique new ember bed technology

Minimalist design

Slimline remote control

Ideal for replacement, renovations or new homes

 

  • Unique ember bed technology to recreate the glow of a natural fire
  • Simple, slimline remote control that’s easy to use
  • Wide viewing window with double glazing for optimum fire view
  • Minimalist frame design that sits flush against the wall
  • Double glazed front – no need for a mesh guard
  • Compatible with LPG or natural gas
  • High heat output for up to 6kW of warmth
  • Designed for replacement, renovations or new homes
  • Available with either natural wood or glowing stones

Specifications

Colours Black or Titanium Grey
Gas Input MJ/h High 27
kW Output 6.0
Heats upto Capacity (m2) : Very Cold 54
Heats upto Capacity (m2) : Cold 65
Heats upto Capacity (m2) : Cool 87
Heats upto Capacity (m2) : Mild 99
AS4553 Efficiency Star Rating 3.7
Visual Dimensions (mm) : Width 740
Visual Dimensions (mm) : Height 654
Visual Dimensions (mm) : Depth 5
 
 
Share on Facebook

Archer 900 Series Models

Manufactured by:
Archer

Archer 900 Series Models

.

$6,935.00

*Prices Vary on Each Model

Operating and Safety Features

Computer Controlled Safety and Efficiency Hot Surface Ignition (H.S.I.) Module

The Archer’s solid state electronic computer control system, gives you safety, convenience and efficiency not seen in Australia before. To start with the Archer electronic solid state module controls every function and operating feature of the heater for safe and efficient operation.

Operating and Safety Features

During operation the independent twin H.S.I. ignition system controls the ignition cycle of each burner automatically to ensure trouble free automatic ignition (no pilot light or troublesome piezo ignition) for added reliability, safety and lower gas bills.

During operation the remote flame sensors constantly monitor the status of the flame for added safety. Archer’s independent (H.S.I.) ignition system lets you select from 3 burner settings. Low, medium and high burn at the touch of a button from easy accessible controls for selection of your own comfort level and lowest operating cost.

Years of painstaking laboratory testing coupled with extensive in field trials have resulted in a truly reliable ignition system. Prior to start up of your heater it automatically purges any un-burnt gas prior to ignition for added safety.

The 3 speed fan which is automatically linked to each burner setting has been customised for optimum comfort and efficiency. The fan in the heater will not start operating until the heater has sufficiently warmed up. When you turn your heater off the fan will keep pushing warm air until all the built up heat in the heater has been extracted. All your heaters operating modes can be viewed on the display monitor located in the front panel.

Additional safety features such as flame failure safety, overheating safety, automatic shutdown if power or gas fails and fan start/stop protection are all built into the Archer solid state electronic module for customising your heater for added safety, optimum comfort and efficiency to give you the comfort of feeling safe in your home.

Zero Clearance Installation

Another direct installation and safety feature derived from the Archer’s revolutionary heat exchange system, is the zero clearance temperature achieved on the top, back and sides only of the heater, which allows the heater to be installed safely against combustible materials. The safety screen fitted to the large neo ceramic door glass will be welcoming news for parents with small children.

Automatic Humidifier Standard

Automatic Humidifier Standard

Most gas heaters dry out the air in the room. Remember the bowls of water in front of the old gas heaters? The Archer has ingeniously solved this problem with an automatic humidifier. Gas contains moisture which is normally expelled out the flue or chimney after combustion but the Archer is so efficient by taking 92% of the heat out of the burnt gases that the moisture drops out and condenses in the back of the heater.

This water is collected in a tank which is then pumped up to a stainless steel holding tank where it evaporates in the stream of hot air, which is blowing into your home. Air humidity is automatically restored. This feature is especially important for those with delicate throats or mild breathing difficulties.

NOTE: The amount of condensate build up depends on outside temperature, humidity levels, length of flue and heat settings. Long single vertical flue will cause the automatic humidifier to activate more often compared to short horizontal coaxial or single flue installations.

Click on the link Below for the Brochure

http://www.auroraclimatesystems.com.au/docs/Archer%20Gas%20Log%20Fire%20Catalogue.pdf

Installation Advantages

Low cost versatile installation

The Archer Gas Log Space Heater technology eliminates costs and flexibility on installations when compared to the installation of most other gas heaters, which require expensive and unsightly flue installations.

The Archer’s revolutionary plastic power flue and plastic 40mm ∅ PVC single flue system eliminates those costly installations and is ideal for high rise apartments, external and internal wall applications anywhere in your home and ideally can be used as a replacement for existing gas or oil space heaters.

The Archer Gas Log Space Heater due to its high efficiency with 92% heat extracted from Archer’s revolutionary heat exchanger ensures that surface temperatures of the heater are kept extremely low to allow zero clearance installations without the added cost of installing a zero clearance box, which allows you to create your own decorative fireplace at the lowest cost.

The PVC co-axial flue system will give you the added benefit of using external combustion air allowing the air in your home to remain fresh. Whilst the 40mm PVC single flue system gives you unlimited installation advantages.

Discover how the Archer Gas Log Space Heater can be installed in your choice of location of existing masonry fireplace, external and internal wall applications, high rise apartments and created zero clearance fireplaces all due to the small bore PVC co-axial or single flue system available only with an Archer heater.

Click on the link below for 900 Series Specifications

http://www.auroraclimatesystems.com.au/range.php

Technical Specifications

900 Series

Heater - 900 Series Heater - 900 Series

Flue & Installation Options

Created Fireplace

Created Fireplace

Internal Wall
(Created Fireplace)

Internal Wall (Created Fireplace)

External Wall
(Created Fireplace)

External Wall (Created Fireplace)

Side Wall

Side Wall

Masonry Internal

Masonry Internal

Masonry External

Masonry External

External Wall

External Wall

Under Floor

Under Floor

Internal – Vertical

Internal - Vertical

Top Flue
FSP600

Top Flue FSP600

Revolutionary Patented Triple Heat Exchanger

International Patent No PCT/AU2007/0011459

The secret of the Archer revolutionary 5.4 – 5.9 energy star performance is the patented triple heat exchanger that puts more heat into your home and money in your pocket instead of up the chimney. The Archer Gas Log Space Heater has shattered the boundaries of acceptable product design.

Revolutionary Patented Triple Heat Exchanger

The basis of the incredible leap in high heat output and high efficiency achieved by the Archer Gas Log Fire is the revolutionary heat exchange system which extracts 92% + heat from the incoming gas which is directly transferred into your home.

The Archer Gas Log Fire does not only feature a burning system that looks realistic, but also incorporates a combustion process which delivers high efficiency and high heat output. (Beauty – Efficiency – Heat)

Aurora after engaging in an extensive research and development program of many years have developed an innovative high efficiency heat exchange system which has amazed the industry and has achieved the highest appraisal from independent heating authorities for its innovative design and efficiency.

The Archer’s high efficiency 3 stage high performance heat exchange system, allows for the heat of the incoming combustible gases to be squeezed to 55°C before they enter the flue resulting in total combustion, to ensure that every megajoule of gas input energy available is put to work for heating the home.

This type of process of achieving high performance heat output has to date not been achieved by any other similar appliance, but with an Archer heater it is reality and you get the benefit.

Heater Comparison

Archer 5-Star Energy Efficiency

The Mj of a heater should not be used for comparing the product’s heat output and capacity. The Kw heat output and efficient heat transfer is the only true method of product comparison.
Example: A 30 Mj heater with a 5.7 Energy Star rating has a larger heat output than a 30 Mj 3 star energy reated heater.

Committed to the Environment
Share on Facebook

Rinnai Sapphire Freestanding Gas Fire

Manufactured by:
Rinnai

Rinnai Sapphire Freestanding Gas Fire

.

$5,186.00

Rating 4.1

Better than the real thing.

With gentle flickering flames and cosy warmth, our recently enhanced Sapphire gas fire gives you all the appeal of an open fire, but without all the bother that goes with it. Packed full with features including a powerful 6.97kW heat output, easy to use remote and stylish glass dress guard – you’ll love relaxing to a roaring fire during those wintry nights.  And if its instant ambience wasn’t enough, the Sapphire’s 4.0 Star clean burning technology makes it a very cost effective way of heating your home.

This installation configuration is available in both:

  • Freestanding plinth – where the unit sits elevated on a plinth
  • Freestanding (floor mounted) – a freestanding design where the unit rests on a same sized base.

FEATURES & PERFORMANCE

Updated logs with improved flame picture

Easy to use remote, with room temperature display and flame control

Instant heat source with the ambiance

Plinth and console freestanding options

  • Powerful 6.97kW output – suitable for heating large open areas
  • Instant heat source with the ambiance
  • Manual operation with flame height settings
  • Stylish glass dress guard for protection
  • Optional plinth or console (floor mounted) kit available.

Specifications

Colours

Stainless steel on black, black & stainless steel

Gas Input MJ/h Low

14

Gas Input MJ/h High

33

kW Output

6.97

Heats upto Capacity (m2) : Very Cold

60

Heats upto Capacity (m2) : Cold

70

Heats upto Capacity (m2) : Cool

95

Heats upto Capacity (m2) : Mild

108

AS4553 Efficiency Star Rating

4.0

Freestanding Dimensions: Height

837

Freestanding Dimensions: Width

865

Freestanding Dimensions: Depth

425

Gas Type

LPG & NG

Visual Dimensions (mm) Width

865

Visual Dimensions (mm) Height

837

Visual Dimensions (mm) Depth

425

 
Share on Facebook

Rinnai 1250 Gas Fire

Rinnai 1250 Gas Fire

.

$9,261.00

Rating 5.5

Relax a little longer. 

At over 1300mm in length, the long landscape design of the 1250 gas fire creates a striking centre piece that meets a variety of interior design styles. More than just a design feature, the 1250 gas fire is equipped with Rinnai’s high performance heat exchanger technology, rapid warm-time and easy-to-use temperature display remote – perfect for quickly heating large, open plan living spaces.

The 1250 pushes the boundaries of traditional gas fires with the optional side reflectors, which give the desired illusion of an everlasting flame with a subtle presence when the appliance is not in use.

Featuring an energy efficiency star rating up to 5.5 stars*, the 1250 is our most efficient built in gas fireplace ever – so you can relax, for longer.

FEATURES & PERFORMANCE

Premium, landscape design

High 5.5* star efficiency rating

Ideal for new homes and major renovations

Fascia and burn media options to suit your style

  • Highly efficient energy rating up to 5.5 stars*
  • Compatible with LPG or natural gas
  • Powerful heat output up to 8.4kW, perfect for open plan living areas†
  • Available with either glowing pebbles or Australian Eucalyptus logs
  • Installation designed specifically for new homes and major renovations
  • Safety mesh guard to provide peace of mind and eliminate reflections
  • Flexible power flueing
  • Easy to use remote, with room temperature display and flame control
  • Optional reflective side panels

*When installed using extended flue. †When using short flue.

Specifications

Inbuilt Cavity Dimensions (mm) : Height 570
Inbuilt Cavity Dimensions (mm) : Width 1265
Inbuilt Cavity Dimensions (mm) : Depth 570 (min)
Colours Stainless steel on black, black on black
Gas Input MJ/h Low 10
Gas Input MJ/h High 34
kW Output 8.4†
Heats upto Capacity (m2) : Very Cold 69
Heats upto Capacity (m2) : Cold 82
Heats upto Capacity (m2) : Cool 110
Heats upto Capacity (m2) : Mild 125
AS4553 Efficiency Star Rating 5.5*
Auto Off Mode Yes
Flame Button Yes
AS4553 Emissions Star Rating NG & LPG NG & LPG
Visual Dimensions (mm) Width 1320
Visual Dimensions (mm) Height 620
Visual Dimensions (mm) Depth 25
 
 
Share on Facebook

Rinnai Sapphire Built-In Gas Fire

Manufactured by:
Rinnai

Rinnai Sapphire Built-In Gas Fire

.

$4,513.00

Rating 4.1

Better than the real thing.

With gentle flickering flames and cosy warmth, our Sapphire built-in gas fire gives you all the appeal of an open fire, but without all the bother that goes with it. Packed full with features including a powerful 6.97kW heat output, easy-to-use remote and stylish glass dress guard – you’ll love relaxing to a roaring fire during those wintry nights.

And if its instant ambience wasn’t enough, the Sapphire’s 4.0 Star clean burning technology makes it a very cost effective way of heating your home.

This installation configuration suits:

False fireplaces (zero clearance) – which enables the construction of a mock fireplace.

Masonry Chimney – designed to suit existing brick fireplaces

FEATURES & PERFORMANCE

High heat output for large open plan areas

Ambience and glow of flickering flames

Stylish glass dress guard for protection

Suits masonry fireplaces and timber framed walls

  • Powerful 6.97kW output – suitable for heating large open areas
  • Instant heat source with the ambience
  • Easy to use remote, with room temperature display and flame control
  • Stylish glass dress guard for protection
  • Compatible with LPG or natural gas
  • Optional plinth or console (floor mounted) kit available.

Specifications

Inbuilt Cavity Dimensions (mm) : Height

650

Inbuilt Cavity Dimensions (mm) : Width

800

Inbuilt Cavity Dimensions (mm) : Depth

420

Colours

Stainless steel on black, black & stainless steel

Gas Input MJ/h Low

14

Gas Input MJ/h High

33

kW Output

6.97

Heats upto Capacity (m2) : Very Cold

60

Heats upto Capacity (m2) : Cold

70

Heats upto Capacity (m2) : Cool

95

Heats upto Capacity (m2) : Mild

108

AS4553 Efficiency Star Rating

4.0

Gas Type

LPG & NG

Visual Dimensions (mm) Width

865

Visual Dimensions (mm) Height

660

Visual Dimensions (mm) Depth

462

 

Share on Facebook

Archer 300 Series – Bay Window Models

Archer 300 Series – Bay Window Models

.

$5,790.00

*Prices Vary on Each Model

Operating and Safety Features

Computer Controlled Safety and Efficiency Hot Surface Ignition (H.S.I.) Module

The Archer’s solid state electronic computer control system, gives you safety, convenience and efficiency not seen in Australia before. To start with the Archer electronic solid state module controls every function and operating feature of the heater for safe and efficient operation.

Operating and Safety Features

During operation the independent twin H.S.I. ignition system controls the ignition cycle of each burner automatically to ensure trouble free automatic ignition (no pilot light or troublesome piezo ignition) for added reliability, safety and lower gas bills.

During operation the remote flame sensors constantly monitor the status of the flame for added safety. Archer’s independent (H.S.I.) ignition system lets you select from 3 burner settings. Low, medium and high burn at the touch of a button from easy accessible controls for selection of your own comfort level and lowest operating cost.

Years of painstaking laboratory testing coupled with extensive in field trials have resulted in a truly reliable ignition system. Prior to start up of your heater it automatically purges any un-burnt gas prior to ignition for added safety.

The 3 speed fan which is automatically linked to each burner setting has been customised for optimum comfort and efficiency. The fan in the heater will not start operating until the heater has sufficiently warmed up. When you turn your heater off the fan will keep pushing warm air until all the built up heat in the heater has been extracted. All your heaters operating modes can be viewed on the display monitor located in the front panel.

Additional safety features such as flame failure safety, overheating safety, automatic shutdown if power or gas fails and fan start/stop protection are all built into the Archer solid state electronic module for customising your heater for added safety, optimum comfort and efficiency to give you the comfort of feeling safe in your home.

Zero Clearance Installation

Another direct installation and safety feature derived from the Archer’s revolutionary heat exchange system, is the zero clearance temperature achieved on the top, back and sides only of the heater, which allows the heater to be installed safely against combustible materials. The safety screen fitted to the large neo ceramic door glass will be welcoming news for parents with small children.

Automatic Humidifier Standard

Automatic Humidifier Standard

Most gas heaters dry out the air in the room. Remember the bowls of water in front of the old gas heaters? The Archer has ingeniously solved this problem with an automatic humidifier. Gas contains moisture which is normally expelled out the flue or chimney after combustion but the Archer is so efficient by taking 92% of the heat out of the burnt gases that the moisture drops out and condenses in the back of the heater.

This water is collected in a tank which is then pumped up to a stainless steel holding tank where it evaporates in the stream of hot air, which is blowing into your home. Air humidity is automatically restored. This feature is especially important for those with delicate throats or mild breathing difficulties.

NOTE: The amount of condensate build up depends on outside temperature, humidity levels, length of flue and heat settings. Long single vertical flue will cause the automatic humidifier to activate more often compared to short horizontal coaxial or single flue installations.

Click on the link Below for the Brochure

http://www.auroraclimatesystems.com.au/docs/Archer%20Gas%20Log%20Fire%20Catalogue.pdf

Installation Advantages

Low cost versatile installation

The Archer Gas Log Space Heater technology eliminates costs and flexibility on installations when compared to the installation of most other gas heaters, which require expensive and unsightly flue installations.

The Archer’s revolutionary plastic power flue and plastic 40mm ∅ PVC single flue system eliminates those costly installations and is ideal for high rise apartments, external and internal wall applications anywhere in your home and ideally can be used as a replacement for existing gas or oil space heaters.

The Archer Gas Log Space Heater due to its high efficiency with 92% heat extracted from Archer’s revolutionary heat exchanger ensures that surface temperatures of the heater are kept extremely low to allow zero clearance installations without the added cost of installing a zero clearance box, which allows you to create your own decorative fireplace at the lowest cost.

The PVC co-axial flue system will give you the added benefit of using external combustion air allowing the air in your home to remain fresh. Whilst the 40mm PVC single flue system gives you unlimited installation advantages.

Discover how the Archer Gas Log Space Heater can be installed in your choice of location of existing masonry fireplace, external and internal wall applications, high rise apartments and created zero clearance fireplaces all due to the small bore PVC co-axial or single flue system available only with an Archer heater.

Click on the link below for 300 Series Specifications

http://www.auroraclimatesystems.com.au/range.php

Technical Specifications

Free Standing

Heater - Free Standing Free Standing

Free Standing with Pedestal

Heater - Free Standing with Pedestal Free Standing with Pedestal

Free Standing with Top Flue

Heater - Free Standing with Top Flue Free Standing with Top Flue

Insert – Shallow & Deep

Heater - Insert - Shallow & Deep Heater - Insert - Shallow & Deep

Flue & Installation Options

Created Fireplace

Created Fireplace

Internal Wall
(Created Fireplace)

Internal Wall (Created Fireplace)

External Wall
(Created Fireplace)

External Wall (Created Fireplace)

Side Wall

Side Wall

Masonry Internal

Masonry Internal

Masonry External

Masonry External

External Wall

External Wall

Under Floor

Under Floor

Internal – Vertical

Internal - Vertical

Top Flue
FSP600

Top Flue FSP600

Revolutionary Patented Triple Heat Exchanger

International Patent No PCT/AU2007/0011459

The secret of the Archer revolutionary 5.4 – 5.9 energy star performance is the patented triple heat exchanger that puts more heat into your home and money in your pocket instead of up the chimney. The Archer Gas Log Space Heater has shattered the boundaries of acceptable product design.

Revolutionary Patented Triple Heat Exchanger

The basis of the incredible leap in high heat output and high efficiency achieved by the Archer Gas Log Fire is the revolutionary heat exchange system which extracts 92% + heat from the incoming gas which is directly transferred into your home.

The Archer Gas Log Fire does not only feature a burning system that looks realistic, but also incorporates a combustion process which delivers high efficiency and high heat output. (Beauty – Efficiency – Heat)

Aurora after engaging in an extensive research and development program of many years have developed an innovative high efficiency heat exchange system which has amazed the industry and has achieved the highest appraisal from independent heating authorities for its innovative design and efficiency.

The Archer’s high efficiency 3 stage high performance heat exchange system, allows for the heat of the incoming combustible gases to be squeezed to 55°C before they enter the flue resulting in total combustion, to ensure that every megajoule of gas input energy available is put to work for heating the home.

This type of process of achieving high performance heat output has to date not been achieved by any other similar appliance, but with an Archer heater it is reality and you get the benefit.

Heater Comparison

Archer 5-Star Energy Efficiency

The Mj of a heater should not be used for comparing the product’s heat output and capacity. The Kw heat output and efficient heat transfer is the only true method of product comparison.
Example: A 30 Mj heater with a 5.7 Energy Star rating has a larger heat output than a 30 Mj 3 star energy reated heater.

Committed to the Environment
Share on Facebook